Official Luthiers Forum!

LuthierSuppliers.com would like to announce the birth of its new jig...THE SIMPLE CENTERLINE FINDER!! Regularly $49 + $5 shipping, but now on Sale for only $44 + $5 shipping until September 20th, 2006.


This jig was inspired by the Center Line Finder jig created by Charles Fox of American School of Luthierie. We liked the idea so much, we decided to improve on the jig by giving this jig a complete overhaul. It now works with all thin and large necked instruments including acoustic guitars, archtops, electric guitars, bouzouki's, and classical guitars.

There are 2 main uses for this jig:

1. When attaching a neck to the body, it is necessary to determine if the neck aligns properly to the center line of the body. This usually involves fiddling with a straight edge clamped to the fretboard while trying to line it up with the centerline of the body. The Simple CenterLine Finder is much quicker than pulling out the straightedge and clamps. This jig takes less than 10 seconds to align everything with the center line!

2. When setting up the bridge before gluing, you must align the bridge with the center line of the body and neck. This also takes a long time for setup, but with The Simple CenterLine Finder you can have the bridge aligned in 10 seconds!

Dimensions: The jig is made of 1/4"(6.5mm) thick acrylic that is 2 3/8"(60mm) wide by 34" long. The swivel arms will fit a 2 3/4"(70mm) neck width to a 1"(25.5mm) neck width. The minimum neck length that it will fit is 12"(1ft).

When you order this jig you will also receive another jig for free! Go to this page to find out more:
http://www.luthiersuppliers.com/products/p9.html

Thanks all for your support over the last year, you are the best customers in the world!! Happy Building!
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

Thanks Tracy, I'm off to do some shopping.

Don A38949.7642592593

_________________
Don Atwood
Arlington, VA

Thanks! I do appreciate all your business Don!
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

Tracy,I got mine today! It is sweet! I LOVE the fact that the area that pushes against the side of the fretboard is round, and soft on lacqure!

Thanks Man!

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com

Lance, so glad you got it safely! I'm just glad to help my fellow luthiers out.

Hesh, thanks for all your support, it really means a lot to me! Happy building!
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

Nice jig! I'll have to buy one for myself!

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."

Thanks Tracy
Paypal sent
Andy

_________________
Andy Z.
http://www.lazydogguitars.com

Tracy -
I just ordered two of them! It looks terrific! Thanks so much.

_________________
Sylvan
http://www.wellsguitars.com

Thanks Sylvan, I was suprised to see 2 of them, disregard the email I sent you. Thanks!!!
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

Hey Lance .. that Lacqure .. must be french, comes already cured and polished, right out of the can !!!

_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"

Great jig, order on the way

Mike
White Oak, Texas

Thanks Terry! Got it!
Tony, you are always so funny, thanks for the laugh!
Mike, look forward to serving you again!
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

Same here, looks great...I'll be ordering one asap. If it's anything like the bracemaker jig, it's great.

Bill

_________________
Eagles may soar, but weasels don't get sucked into jet engines.

Just placed my order Tracy and also ordered your brace maker in the process.

Thanks Bill and Rich! I got your order Rich and we'll start processing all of them immediately. Thanks!
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

   Accuracy through simplicity. Brilliant! Awesome jig.

Hey Tracy,

I typically like to build my own jigs but have been long looking for an opportunity to reciprocate the support you have shown me in the past. Your two function jig looks wonderful and in my opinion well worth the money. Pay pal has been sent. Thanks for continueing to be innovative!!

Shane

_________________
Canada

Thanks Shane, I do understand how you feel. I love to support my fellow sponsors when I can. I do thank you for this great comraderie between sponsors. I truly feel we all help each other sell and improve our services to the customers on this forum. Thanks for being a great sponsor too, and I do appreciate your support.

Venom, right on! Thanks for the kind words!
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

Nice jig, just bought one.

Thanks for your support Marc!
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

I got mine already! This thing is sweeeeeeet!

Tracey I've seen a bunch of ideas/versions of this jig that I've been thinking of making. Yours makes it too irresistible not to purchase.

This jig looks like it will be handy for laying out/centering fretboard inlays as well.

PayPal sent.Anthony Z38948.4415393519

This is definitely a must have. Very cool. Everytime I put an aluminum straightedge up there, I'm afraid it's going to ding something! I Paypaled you!...Thanks Tracy.